ISO VG 1500
ISO VG 1500. 5 oils, from Castrol, Chevron, Shell. Match the ISO grade in the manual first. Numbers are typical, off the data sheet, not a batch cert. Published viscosity indexes run from 86 to 290. VI is how much it thins from 40 °C to 100 °C. ISO grade is the thickness at 40. Different number. Pour points run from -21 °C to -6 °C. The machine should still start at least 5 °C warmer than the pour point of the oil you pick. 3 are flagged synthetic and 2 are not. Synthetic means the maker said synthetic. Still fill the ISO grade the manual calls for. 1 of these oils are PAG (polyalkylene glycol). PAG does not mix with mineral oil or PAO. Drain and flush before a change into or out of a PAG, and do not treat a PAG as an equivalent of either. None of these rows has an Amazon or McMaster-Carr listing in the catalogue yet. The spec comparison is still usable. A distributor quote is the way to buy the rest. Sort by grade, viscosity index, and pour point, then open an oil for the data sheet and the buy links. Same job, same ISO grade, different brand. Not a drop-in. They are not exact substitutes, and the OEM specification still governs.
| Oil | ISO | KV40 | VI | Pour | Buy |
|---|---|---|---|---|---|
| Castrol Optigear Synthetic 800/1500 | 1500 | 1500 | 290 | -12 | — |
| Shell Omala S3 GP 1500 | 1500 | 1500 | 124 | -21 | — |
| Chevron Meropa 1500 | 1500 | 1500 | 113 | -19 | — |
| Castrol Molub-Alloy GM 1500 | 1500 | 1500 | 95 | -6 | — |
| Castrol Optigear 1100/1500 | 1500 | 1480 | 86 | -15 | — |
