Castrol Hyspin Spindle Oil 3
ISO VG 10 r&o spindle oil
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 10.03 cSt | ASTM D445 |
| KV100 | 2.61 cSt | ASTM D445 |
| Viscosity index | 105 | ASTM D2270 |
| Pour point | — | ASTM D97 |
| Flash point | 135 °C | ASTM D92 |
| Density at 15 °C | — | typical |
Grade checks
- KV40 is inside ISO VG 10 (9–11 cSt).
- Computed viscosity index is 88 from the stored KV40 and KV100 (ASTM D2270). The listed index is 105, more than 2 points away.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Spindle
- Attribute: R&O
- Synthetic: Conventional
- Copper: Unlisted
Equivalents
| Oil | Score | Why |
|---|---|---|
| Shell Morlina S2 BL 10 | 45 | same ISO 10, additive ro, conventional, flash within 15 °C |
| Mobil Velocite Oil No 6 | 45 | same ISO 10, additive ro, conventional, buyable now |
Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.
Documents
- No product data sheet link.
Related: Castrol, Hyspin Spindle, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Castrol Hyspin Spindle Oil 3 an ISO VG 10 oil?
Yes. The catalogue lists it as ISO VG 10, which is a kinematic viscosity of 10 cSt at 40 °C, plus or minus 10 percent (9 to 11 cSt). Confirm the current data sheet before you fill a machine.
What is a Castrol Hyspin Spindle Oil 3 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Castrol Hyspin Spindle Oil 3 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
