Castrol Optigear Synthetic 800/1000
ISO VG 1000 extreme pressure gear oil
Will this oil hold film at your speed and temp? Run the EHL check
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 1000 cSt | ASTM D445 |
| KV100 | 155 cSt | ASTM D445 |
| Viscosity index | 275 | ASTM D2270 |
| Pour point | -24 °C | ASTM D97 |
| Flash point | 390 °C | ASTM D92 |
| Density at 15 °C | 1.065 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 1000 (900–1100 cSt).
- Computed viscosity index is 272 from the stored KV40 and KV100 (ASTM D2270). The listed index is 275, more than 2 points away.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Gear
- Attribute: Extreme Pressure
- Synthetic: Synthetic
- Base oil: V PAG
- AGMA class: AS
- FZG fail stage: >=12
- Copper: 1A
- Note: For the lubrication of heavily loaded gears, brushings and bearings over a wide temp
Sulfur, EP additives and yellow metal
Extreme-pressure gear oils use sulfur compounds so steel teeth do not weld under shock. That same sulfur can tarnish or pit copper, brass and bronze: a bronze worm wheel, a brass cage, a cooler tube. ASTM D130 sits a polished copper strip in the oil and scores the colour. 1A and 1B are the ratings to keep when yellow metal shares the oil. The strip below is that test at room temperature.
How lubricant-induced copper corrosion works
Equivalents
No other brand in this catalogue passes the equivalents filters for this oil.
Documents
- Product data sheet
- Safety data sheet
- Specs last read from the data sheet on 2026-09-09.
Related: Castrol, Optigear Synthetic 800, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Castrol Optigear Synthetic 800/1000 an ISO VG 1000 oil?
Yes. The catalogue lists it as ISO VG 1000, which is a kinematic viscosity of 1000 cSt at 40 °C, plus or minus 10 percent (900 to 1100 cSt). Confirm the current data sheet before you fill a machine.
What is a Castrol Optigear Synthetic 800/1000 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Castrol Optigear Synthetic 800/1000 be mixed with mineral oil or PAO?
No. This oil is a PAG (polyalkylene glycol). PAG does not mix with mineral oil or PAO. Drain and flush before changing into it or out of it.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
