Castrol Optigear Synthetic CT

ISO VG 320 extreme pressure gear oil

Will this oil hold film at your speed and temp? Run the EHL check

Buy

No buy link yet. Email us and we'll point you at a distributor.

Key specs

SpecValueMethod
KV40335 cStASTM D445
KV10040.4 cStASTM D445
Viscosity index174ASTM D2270
Pour point-45 °CASTM D97
Flash point250 °CASTM D92
Density at 15 °C0.85 g/cm³typical
A worm turning behind a sight glass of ISO VG 460 gear oil. Footage by Evolvent.

Grade checks

Viscosity and temperature

ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.

0 °C120 °C


Picked a grade? Check it holds film -> EHL calculator

Classification

Sulfur, EP additives and yellow metal

Extreme-pressure gear oils use sulfur compounds so steel teeth do not weld under shock. That same sulfur can tarnish or pit copper, brass and bronze: a bronze worm wheel, a brass cage, a cooler tube. ASTM D130 sits a polished copper strip in the oil and scores the colour. 1A and 1B are the ratings to keep when yellow metal shares the oil. The strip below is that test at room temperature.

How lubricant-induced copper corrosion works

A copper strip in an active-sulfur oil. The timer is part of the picture, and the clip plays once. Footage by Evolvent.

Equivalents

OilScoreWhy
Shell Omala S4 GXV 32095same ISO 320, VI 169 vs 174, additive ep, synthetic, pour -42 vs -45, flash within 15 °C, AGMA AS, buyable now
Mobil Mobil SHC 63293same ISO 320, VI 172 vs 174, additive ep, synthetic, pour -48 vs -45, AGMA AS, buyable now
Mobil Mobil SHC Gear OH 32091same ISO 320, VI 178 vs 174, additive ep, synthetic, pour -45 vs -45, AGMA AS, buyable now
Shell Omala S5 Wind 32091same ISO 320, VI 170 vs 174, additive ep, synthetic, pour -48 vs -45, flash within 15 °C, AGMA AS
Chevron Tegra Synthetic Gear 32086same ISO 320, VI 165 vs 174, additive ep, synthetic, pour -39 vs -45, flash within 15 °C, AGMA AS

Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.

Full equivalents list

Documents

Related: Castrol, Optigear synthetic CT, viscosity index calculator, ISO / SAE / AGMA chart.

Questions

Is Castrol Optigear Synthetic CT an ISO VG 320 oil?

Yes. The catalogue lists it as ISO VG 320, which is a kinematic viscosity of 320 cSt at 40 °C, plus or minus 10 percent (288 to 352 cSt). Confirm the current data sheet before you fill a machine.

What is a Castrol Optigear Synthetic CT equivalent?

Published oils in the same application and grade include Shell Omala S4 GXV 320, Mobil Mobil SHC 632, Mobil Mobil SHC Gear OH 320. The match is from typical data-sheet values, not from an OEM approval. It is not an exact equivalent. Confirm the substitute with the machine builder.

Can Castrol Optigear Synthetic CT be mixed with another oil?

Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.

Report a data error

The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.

We log calculator inputs and your IP to see what gets used. We also use Google and Meta cookies, Cloudflare Web Analytics, and a first-party cookie named ovc_acq that remembers how you arrived. Details