Castrol Optigear Synthetic PD 320 ES
ISO VG 320 gear oil
Will this oil hold film at your speed and temp? Run the EHL check
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 330 cSt | ASTM D445 |
| KV100 | 40.7 cSt | ASTM D445 |
| Viscosity index | 177 | ASTM D2270 |
| Pour point | -45 °C | ASTM D97 |
| Flash point | 250 °C | ASTM D92 |
| Density at 15 °C | 0.855 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 320 (288–352 cSt).
- Computed viscosity index is 177, within 2 points of the listed 177.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Gear
- Synthetic: Synthetic
- Copper: 1
- Note: Synthetic gear lubricant, PAO-based
Equivalents
| Oil | Score | Why |
|---|---|---|
| Mobil Mobil SHC Gear OH 320 | 59 | same ISO 320, VI 178 vs 177, synthetic, pour -45 vs -45, buyable now |
| Shell Omala S4 GXV 320 | 57 | same ISO 320, VI 169 vs 177, synthetic, pour -42 vs -45, flash within 15 °C, buyable now |
| Mobil Mobil SHC 632 | 55 | same ISO 320, VI 172 vs 177, synthetic, pour -48 vs -45, buyable now |
| Chevron Meropa Synthetic EP 320 | 53 | same ISO 320, VI 165 vs 177, synthetic, pour -39 vs -45, flash within 15 °C, buyable now |
| Shell Omala S5 Wind 320 | 53 | same ISO 320, VI 170 vs 177, synthetic, pour -48 vs -45, flash within 15 °C |
Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.
Documents
Related: Castrol, Optigear Synthetic PD..ES, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Castrol Optigear Synthetic PD 320 ES an ISO VG 320 oil?
Yes. The catalogue lists it as ISO VG 320, which is a kinematic viscosity of 320 cSt at 40 °C, plus or minus 10 percent (288 to 352 cSt). Confirm the current data sheet before you fill a machine.
What is a Castrol Optigear Synthetic PD 320 ES equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Castrol Optigear Synthetic PD 320 ES be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
