Chevron Canopus 68
ISO VG 68 hydraulic oil
Will this oil hold film at your speed and temp? Run the EHL check
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 64.6 cSt | ASTM D445 |
| KV100 | 8.4 cSt | ASTM D445 |
| Viscosity index | 99 | ASTM D2270 |
| Pour point | -15 °C | ASTM D97 |
| Flash point | 242 °C | ASTM D92 |
| Density at 15 °C | 0.869 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 68 (61.2–74.8 cSt).
- Computed viscosity index is 99, within 2 points of the listed 99.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Hydraulic
- Synthetic: Conventional
- Copper: Unlisted
- Note: Circulating Oil
Equivalents
| Oil | Score | Why |
|---|---|---|
| Mobil DTE 26 | 64 | same ISO 68, VI 98 vs 99, conventional, pour -21 vs -15, flash within 15 °C, buyable now |
| Mobil Nuto H 68 | 59 | same ISO 68, VI 98 vs 99, conventional, pour -18 vs -15, flash within 15 °C |
| Mobil Heavy Medium | 56 | same ISO 68, VI 95 vs 99, conventional, pour -15 vs -15, buyable now |
| Castrol Hyspin AWS 68 | 51 | same ISO 68, VI 95 vs 99, conventional, pour -21 vs -15 |
| Mobil Teresstic 68 | 51 | same ISO 68, VI 95 vs 99, conventional, pour -12 vs -15 |
Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.
Documents
Related: Chevron, Canopus, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Chevron Canopus 68 an ISO VG 68 oil?
Yes. The catalogue lists it as ISO VG 68, which is a kinematic viscosity of 68 cSt at 40 °C, plus or minus 10 percent (61.2 to 74.8 cSt). Confirm the current data sheet before you fill a machine.
What is a Chevron Canopus 68 equivalent?
Published oils in the same application and grade include Mobil DTE 26. The match is from typical data-sheet values, not from an OEM approval. It is not an exact equivalent. Confirm the substitute with the machine builder.
Can Chevron Canopus 68 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
