Chevron Regal R&O 460
ISO VG 460 anti-wear, r&o turbine oil
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 460 cSt | ASTM D445 |
| KV100 | 31.3 cSt | ASTM D445 |
| Viscosity index | 97 | ASTM D2270 |
| Pour point | -12 °C | ASTM D97 |
| Flash point | 310 °C | ASTM D92 |
| Density at 15 °C | 0.896 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 460 (414–506 cSt).
- Computed viscosity index is 98, within 2 points of the listed 97.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Turbine
- Attribute: Anti-Wear, R&O
- Synthetic: Conventional
- Copper: 1A
- Note: Steam and hydroelectric turbines
Equivalents
No other brand in this catalogue passes the equivalents filters for this oil.
Documents
Related: Chevron, Regal R&O, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Chevron Regal R&O 460 an ISO VG 460 oil?
Yes. The catalogue lists it as ISO VG 460, which is a kinematic viscosity of 460 cSt at 40 °C, plus or minus 10 percent (414 to 506 cSt). Confirm the current data sheet before you fill a machine.
What is a Chevron Regal R&O 460 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Chevron Regal R&O 460 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
