Mobil Mobilarma 524
R&o rust preventative oil
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 88.4 cSt | ASTM D445 |
| KV100 | 10.5 cSt | ASTM D445 |
| Viscosity index | 95 | ASTM D2270 |
| Pour point | -18 °C | ASTM D97 |
| Flash point | 218 °C | ASTM D92 |
| Density at 15 °C | 0.882 g/cm³ | typical |
Grade checks
- No ISO grade is stored.
- Computed viscosity index is 101 from the stored KV40 and KV100 (ASTM D2270). The listed index is 95, more than 2 points away.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Rust Preventative
- Attribute: R&O
- Synthetic: Unlisted
- Copper: Unlisted
- Note: Run-in or lay-up (rust preventive)
Equivalents
No other brand in this catalogue passes the equivalents filters for this oil.
Documents
Related: Mobil, Mobilarma 500, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
What is a Mobil Mobilarma 524 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Mobil Mobilarma 524 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
