Mobil Nuto H 46
ISO VG 46 anti-wear hydraulic oil
Will this oil hold film at your speed and temp? Run the EHL check
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 44 cSt | ASTM D445 |
| KV100 | 6.6 cSt | ASTM D445 |
| Viscosity index | 98 | ASTM D2270 |
| Pour point | -24 °C | ASTM D97 |
| Flash point | 226 °C | ASTM D92 |
| Density at 15 °C | 0.876 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 46 (41.4–50.6 cSt).
- Computed viscosity index is 101 from the stored KV40 and KV100 (ASTM D2270). The listed index is 98, more than 2 points away.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Hydraulic
- Attribute: Anti-Wear
- Synthetic: Conventional
- Copper: 1A
- Note: Anti-wear, filterable, hydraulic oil
Equivalents
| Oil | Score | Why |
|---|---|---|
| Chevron Hydraulic Oil AW 46 | 85 | same ISO 46, VI 98 vs 98, additive aw, conventional, pour -23 vs -24, flash within 15 °C |
| Shell Tellus S2 M 46 | 85 | same ISO 46, VI 98 vs 98, additive aw, conventional, pour -30 vs -24, flash within 15 °C |
| Castrol Hyspin AWS 46 | 82 | same ISO 46, VI 95 vs 98, additive aw, conventional, pour -24 vs -24, flash within 15 °C |
| Shell Tellus S2 MX 46 | 78 | same ISO 46, VI 105 vs 98, additive aw, conventional, pour -30 vs -24, flash within 15 °C |
| Chevron Clarity AW 46 | 77 | same ISO 46, VI 101 vs 98, additive aw, conventional, flash within 15 °C, buyable now |
Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.
Documents
Related: Mobil, Nuto H, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Mobil Nuto H 46 an ISO VG 46 oil?
Yes. The catalogue lists it as ISO VG 46, which is a kinematic viscosity of 46 cSt at 40 °C, plus or minus 10 percent (41.4 to 50.6 cSt). Confirm the current data sheet before you fill a machine.
What is a Mobil Nuto H 46 equivalent?
Published oils in the same application and grade include Chevron Hydraulic Oil AW 46, Shell Tellus S2 M 46, Castrol Hyspin AWS 46. The match is from typical data-sheet values, not from an OEM approval. It is not an exact equivalent. Confirm the substitute with the machine builder.
Can Mobil Nuto H 46 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
