Mobil Vacuoline 137
ISO VG 320 other oil
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 320 cSt | ASTM D445 |
| KV100 | 23.9 cSt | ASTM D445 |
| Viscosity index | 95 | ASTM D2270 |
| Pour point | -9 °C | ASTM D97 |
| Flash point | 286 °C | ASTM D92 |
| Density at 15 °C | 0.9 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 320 (288–352 cSt).
- Computed viscosity index is 95, within 2 points of the listed 95.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Other
- Synthetic: Conventional
- Copper: 1B
- Note: Rolling mill
Equivalents
No other brand in this catalogue passes the equivalents filters for this oil.
Documents
Related: Mobil, Vacuoline 100 Series, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Mobil Vacuoline 137 an ISO VG 320 oil?
Yes. The catalogue lists it as ISO VG 320, which is a kinematic viscosity of 320 cSt at 40 °C, plus or minus 10 percent (288 to 352 cSt). Confirm the current data sheet before you fill a machine.
What is a Mobil Vacuoline 137 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Mobil Vacuoline 137 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
