Shell Air Tool Oil S2 A 150
ISO VG 150 anti-wear pneumatic oil
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 150 cSt | ASTM D445 |
| KV100 | 15.1 cSt | ASTM D445 |
| Viscosity index | 101 | ASTM D2270 |
| Pour point | -24 °C | ASTM D97 |
| Flash point | 246 °C | ASTM D92 |
| Density at 15 °C | 0.887 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 150 (135–165 cSt).
- Computed viscosity index is 101, within 2 points of the listed 101.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Pneumatic
- Attribute: Anti-Wear
- Synthetic: Conventional
- Copper: Unlisted
- Note: Pneumatic tools
Equivalents
| Oil | Score | Why |
|---|---|---|
| Chevron Aries 150 | 83 | same ISO 150, VI 99 vs 101, additive aw, conventional, pour -30 vs -24, flash within 15 °C |
Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.
Documents
- No product data sheet link.
Related: Shell, Air Tool Oil S2 A, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Shell Air Tool Oil S2 A 150 an ISO VG 150 oil?
Yes. The catalogue lists it as ISO VG 150, which is a kinematic viscosity of 150 cSt at 40 °C, plus or minus 10 percent (135 to 165 cSt). Confirm the current data sheet before you fill a machine.
What is a Shell Air Tool Oil S2 A 150 equivalent?
Published oils in the same application and grade include Chevron Aries 150. The match is from typical data-sheet values, not from an OEM approval. It is not an exact equivalent. Confirm the substitute with the machine builder.
Can Shell Air Tool Oil S2 A 150 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
