Shell Corena S4 P 68
ISO VG 68 anti-wear, extreme pressure compressor oil
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 68 cSt | ASTM D445 |
| KV100 | 8.5 cSt | ASTM D445 |
| Viscosity index | — | ASTM D2270 |
| Pour point | -51 °C | ASTM D97 |
| Flash point | 250 °C | ASTM D92 |
| Density at 15 °C | 0.99 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 68 (61.2–74.8 cSt).
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Compressor
- Attribute: Anti-Wear, Extreme Pressure
- Synthetic: Synthetic
- Copper: Unlisted
- Note: Synthetic piston air compressor
Equivalents
| Oil | Score | Why |
|---|---|---|
| Chevron Cetus PAO 68 | 48 | same ISO 68, additive aw, synthetic, pour -47 vs -51, flash within 15 °C, buyable now |
| Chevron Cetus Hipersyn 68 | 38 | same ISO 68, additive aw, synthetic, flash within 15 °C, buyable now |
| Chevron Capella WF 68 | 28 | same ISO 68, additive aw, synthetic |
| Chevron Cetus DE 68 | 20 | same ISO 68, synthetic, flash within 15 °C |
| Chevron Capella P 68 | 18 | same ISO 68, additive aw, flash within 15 °C |
Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.
Documents
- No product data sheet link.
Related: Shell, Corena S4 P, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Shell Corena S4 P 68 an ISO VG 68 oil?
Yes. The catalogue lists it as ISO VG 68, which is a kinematic viscosity of 68 cSt at 40 °C, plus or minus 10 percent (61.2 to 74.8 cSt). Confirm the current data sheet before you fill a machine.
What is a Shell Corena S4 P 68 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Shell Corena S4 P 68 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
