Shell Corena S5 R 46
ISO VG 46 anti-wear, r&o compressor oil
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 46 cSt | ASTM D445 |
| KV100 | 8.2 cSt | ASTM D445 |
| Viscosity index | 170 | ASTM D2270 |
| Pour point | — | ASTM D97 |
| Flash point | 270 °C | ASTM D92 |
| Density at 15 °C | 0.99 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 46 (41.4–50.6 cSt).
- Computed viscosity index is 154 from the stored KV40 and KV100 (ASTM D2270). The listed index is 170, more than 2 points away.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Compressor
- Attribute: Anti-Wear, R&O
- Synthetic: Synthetic
- Copper: 1B
- Note: Synthetic, rotary air compressor oil
Equivalents
| Oil | Score | Why |
|---|---|---|
| Chevron Cetus PAO 46 | 45 | same ISO 46, VI 136 vs 170, additive aw/ro, synthetic, buyable now |
| Chevron Cetus Hipersyn 46 | 33 | same ISO 46, VI 130 vs 170, additive aw, synthetic, buyable now |
| Mobil Rarus 425 | 13 | same ISO 46, VI 105 vs 170, additive ro |
Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.
Documents
Related: Shell, Corena S5 R, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Shell Corena S5 R 46 an ISO VG 46 oil?
Yes. The catalogue lists it as ISO VG 46, which is a kinematic viscosity of 46 cSt at 40 °C, plus or minus 10 percent (41.4 to 50.6 cSt). Confirm the current data sheet before you fill a machine.
What is a Shell Corena S5 R 46 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Shell Corena S5 R 46 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
