Shell Morlina S2 B 100
ISO VG 100 anti-wear, r&o bearing oil
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 100 cSt | ASTM D445 |
| KV100 | 11.2 cSt | ASTM D445 |
| Viscosity index | 97 | ASTM D2270 |
| Pour point | -18 °C | ASTM D97 |
| Flash point | 250 °C | ASTM D92 |
| Density at 15 °C | 0.881 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 100 (90–110 cSt).
- Computed viscosity index is 97, within 2 points of the listed 97.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Bearing
- Attribute: Anti-Wear, R&O
- Synthetic: Conventional
- Copper: Unlisted
- Note: Bearing and circulating oil
Equivalents
No other brand in this catalogue passes the equivalents filters for this oil.
Documents
- No product data sheet link.
Related: Shell, Morlina S2 B, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Shell Morlina S2 B 100 an ISO VG 100 oil?
Yes. The catalogue lists it as ISO VG 100, which is a kinematic viscosity of 100 cSt at 40 °C, plus or minus 10 percent (90 to 110 cSt). Confirm the current data sheet before you fill a machine.
What is a Shell Morlina S2 B 100 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Shell Morlina S2 B 100 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
