Shell Naturelle HF-M
ISO VG 46 biodegradable, anti-wear, r&o hydraulic oil
Will this oil hold film at your speed and temp? Run the EHL check
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 42 cSt | ASTM D445 |
| KV100 | 9.5 cSt | ASTM D445 |
| Viscosity index | 220 | ASTM D2270 |
| Pour point | -42 °C | ASTM D97 |
| Flash point | 256 °C | ASTM D92 |
| Density at 15 °C | 0.924 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 46 (41.4–50.6 cSt).
- Computed viscosity index is 220, within 2 points of the listed 220.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Hydraulic
- Attribute: Biodegradable, Anti-Wear, R&O
- Synthetic: Synthetic
- Copper: Unlisted
- Note: Biodegradable, synthetic, R&O
Equivalents
| Oil | Score | Why |
|---|---|---|
| Chevron Clarity Synthetic EA 46 | 40 | same ISO 46, VI 180 vs 220, additive aw/ro, synthetic |
| Castrol Performance Bio HE ESU Range | 15 | same ISO 46, VI 185 vs 220, synthetic |
Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.
Documents
Related: Shell, Naturelle HF-M, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Shell Naturelle HF-M an ISO VG 46 oil?
Yes. The catalogue lists it as ISO VG 46, which is a kinematic viscosity of 46 cSt at 40 °C, plus or minus 10 percent (41.4 to 50.6 cSt). Confirm the current data sheet before you fill a machine.
What is a Shell Naturelle HF-M equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Shell Naturelle HF-M be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
