Shell Naturelle S2 46
ISO VG 46 biodegradable, anti-wear, fire-resistant hydraulic oil
Will this oil hold film at your speed and temp? Run the EHL check
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 47.2 cSt | ASTM D445 |
| KV100 | 9.41 cSt | ASTM D445 |
| Viscosity index | 188 | ASTM D2270 |
| Pour point | -42 °C | ASTM D97 |
| Flash point | 320 °C | ASTM D92 |
| Density at 15 °C | 0.921 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 46 (41.4–50.6 cSt).
- Computed viscosity index is 188, within 2 points of the listed 188.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Hydraulic
- Attribute: Biodegradable, Anti-Wear, Fire-Resistant
- Synthetic: Synthetic
- Copper: Unlisted
- Note: Biodegradable, synthetic, low ecotoxicity
Equivalents
| Oil | Score | Why |
|---|---|---|
| Chevron Clarity Synthetic EA 46 | 62 | same ISO 46, VI 180 vs 188, additive aw, synthetic |
| Castrol Performance Bio HE ESU Range | 42 | same ISO 46, VI 185 vs 188, synthetic |
Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.
Documents
Related: Shell, Naturelle S2, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Shell Naturelle S2 46 an ISO VG 46 oil?
Yes. The catalogue lists it as ISO VG 46, which is a kinematic viscosity of 46 cSt at 40 °C, plus or minus 10 percent (41.4 to 50.6 cSt). Confirm the current data sheet before you fill a machine.
What is a Shell Naturelle S2 46 equivalent?
Published oils in the same application and grade include Chevron Clarity Synthetic EA 46. The match is from typical data-sheet values, not from an OEM approval. It is not an exact equivalent. Confirm the substitute with the machine builder.
Can Shell Naturelle S2 46 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
