Shell Ondina X 420
Food-grade other oil
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 18 cSt | ASTM D445 |
| KV100 | 4.1 cSt | ASTM D445 |
| Viscosity index | 130 | ASTM D2270 |
| Pour point | -36 °C | ASTM D97 |
| Flash point | 225 °C | ASTM D92 |
| Density at 15 °C | 0.816 g/cm³ | typical |
Grade checks
- No ISO grade is stored.
- Computed viscosity index is 131, within 2 points of the listed 130.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Other
- Attribute: Food-Grade
- Synthetic: Conventional
- Copper: Unlisted
- Note: Medicinal white oil
Equivalents
No other brand in this catalogue passes the equivalents filters for this oil.
Documents
Related: Shell, Ondina X, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
What is a Shell Ondina X 420 equivalent?
No other brand in this catalogue clears the equivalents bar for this oil yet (same application, same grade, compatible base oil, and a score of 60 or more). That is not proof that nothing else works. Check the machine manual.
Can Shell Ondina X 420 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
