Shell Tellus S3 M 68
ISO VG 68 anti-wear hydraulic oil
Will this oil hold film at your speed and temp? Run the EHL check
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 68 cSt | ASTM D445 |
| KV100 | 10.2 cSt | ASTM D445 |
| Viscosity index | 135 | ASTM D2270 |
| Pour point | -51 °C | ASTM D97 |
| Flash point | 250 °C | ASTM D92 |
| Density at 15 °C | 0.835 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 68 (61.2–74.8 cSt).
- Computed viscosity index is 135, within 2 points of the listed 135.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Hydraulic
- Attribute: Anti-Wear
- Synthetic: Conventional
- Copper: Unlisted
- Note: Zinc-free
Equivalents
| Oil | Score | Why |
|---|---|---|
| Castrol Dual Range HV 68 | 65 | same ISO 68, VI 150 vs 135, additive aw, conventional, flash within 15 °C, buyable now |
| Mobil Excel 68 | 54 | same ISO 68, VI 156 vs 135, additive aw, conventional, flash within 15 °C |
| Mobil Univis 68 | 54 | same ISO 68, VI 151 vs 135, additive aw, conventional |
| Chevron Rando HDZ 68 | 51 | same ISO 68, VI 154 vs 135, additive aw, conventional |
| Mobil DTE 26 | 50 | same ISO 68, VI 98 vs 135, additive aw, conventional, flash within 15 °C, buyable now |
Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.
Documents
- No product data sheet link.
Related: Shell, Tellus S3 M, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Shell Tellus S3 M 68 an ISO VG 68 oil?
Yes. The catalogue lists it as ISO VG 68, which is a kinematic viscosity of 68 cSt at 40 °C, plus or minus 10 percent (61.2 to 74.8 cSt). Confirm the current data sheet before you fill a machine.
What is a Shell Tellus S3 M 68 equivalent?
Published oils in the same application and grade include Castrol Dual Range HV 68. The match is from typical data-sheet values, not from an OEM approval. It is not an exact equivalent. Confirm the substitute with the machine builder.
Can Shell Tellus S3 M 68 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
