Shell Tonna S3 M
Shell Tonna S3 M. 2 oils, from Shell. Match the ISO grade in the manual first. Numbers are typical, off the data sheet, not a batch cert. Published viscosity indexes run from 98 to 98. VI is how much it thins from 40 °C to 100 °C. ISO grade is the thickness at 40. Different number. Pour points run from -24 °C to -15 °C. The machine should still start at least 5 °C warmer than the pour point of the oil you pick. None are flagged synthetic. Synthetic means the maker said synthetic. Still fill the ISO grade the manual calls for. None of these rows are tagged PAG. If a data sheet later says polyalkylene glycol, do not mix that oil with a mineral or PAO fill. None of these rows has an Amazon or McMaster-Carr listing in the catalogue yet. The spec comparison is still usable. A distributor quote is the way to buy the rest. Sort by grade, viscosity index, and pour point, then open an oil for the data sheet and the buy links. Same job, same ISO grade, different brand. Not a drop-in. They are not exact substitutes, and the OEM specification still governs.
| Oil | ISO | KV40 | VI | Pour | Buy |
|---|---|---|---|---|---|
| Shell Tonna S3 M 68 | 68 | 68 | 98 | -24 | — |
| Shell Tonna S3 M 220 | 220 | 220 | 98 | -15 | — |
