Shell Tonna S3 M 220
ISO VG 220 anti-wear, r&o ways oil
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 220 cSt | ASTM D445 |
| KV100 | 19.1 cSt | ASTM D445 |
| Viscosity index | 98 | ASTM D2270 |
| Pour point | -15 °C | ASTM D97 |
| Flash point | 250 °C | ASTM D92 |
| Density at 15 °C | 0.894 g/cm³ | typical |
Grade checks
- KV40 is inside ISO VG 220 (198–242 cSt).
- Computed viscosity index is 98, within 2 points of the listed 98.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Ways
- Attribute: Anti-Wear, R&O
- Synthetic: Unlisted
- Copper: Unlisted
- Note: Machine slideways
Equivalents
| Oil | Score | Why |
|---|---|---|
| Chevron Way Lubricant 220 | 73 | same ISO 220, VI 100 vs 98, additive aw/ro, pour -15 vs -15, flash within 15 °C, buyable now |
| Mobil Vacuoline 1419 | 46 | same ISO 220, VI 96 vs 98, additive ro, flash within 15 °C |
| Chevron Way Oil Vistac 220 | 35 | same ISO 220, VI 60 vs 98, additive aw/ro, pour -15 vs -15 |
| Mobil Vactra Oil No 4 | 5 | same ISO 220, buyable now |
Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.
Documents
- No product data sheet link.
Related: Shell, Tonna S3 M, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
Is Shell Tonna S3 M 220 an ISO VG 220 oil?
Yes. The catalogue lists it as ISO VG 220, which is a kinematic viscosity of 220 cSt at 40 °C, plus or minus 10 percent (198 to 242 cSt). Confirm the current data sheet before you fill a machine.
What is a Shell Tonna S3 M 220 equivalent?
Published oils in the same application and grade include Chevron Way Lubricant 220. The match is from typical data-sheet values, not from an OEM approval. It is not an exact equivalent. Confirm the substitute with the machine builder.
Can Shell Tonna S3 M 220 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
