Shell Catenex T 129
Hydraulic oil
Will this oil hold film at your speed and temp? Run the EHL check
Buy
No buy link yet. Email us and we'll point you at a distributor.
Key specs
| Spec | Value | Method |
|---|---|---|
| KV40 | 41 cSt | ASTM D445 |
| KV100 | 6.3 cSt | ASTM D445 |
| Viscosity index | 103 | ASTM D2270 |
| Pour point | -15 °C | ASTM D97 |
| Flash point | 226 °C | ASTM D92 |
| Density at 15 °C | 0.865 g/cm³ | typical |
Grade checks
- No ISO grade is stored.
- Computed viscosity index is 101, within 2 points of the listed 103.
Viscosity and temperature
ASTM D341 curve between the published 40 °C and 100 °C points. Ignore it colder than the pour point. Move the control to read a temperature.
Picked a grade? Check it holds film -> EHL calculator
Classification
- Category: Hydraulic
- Synthetic: Conventional
- Copper: Unlisted
- Note: Hydrotreated paraffin, sulfur-free
Equivalents
| Oil | Score | Why |
|---|---|---|
| Mobil Medium | 60 | KV40 within 10%, VI 98 vs 103, conventional, pour -15 vs -15, flash within 15 °C, buyable now |
| Mobil DTE 25 | 50 | KV40 within 10%, VI 98 vs 103, conventional, flash within 15 °C, buyable now |
| Chevron Hydraulic Oil AW 46 | 45 | KV40 within 10%, VI 98 vs 103, conventional, flash within 15 °C |
| Mobil Nuto H 46 | 45 | KV40 within 10%, VI 98 vs 103, conventional, flash within 15 °C |
| Mobil Nyvac FR 200D | 15 | KV40 within 10%, VI 175 vs 103, conventional |
Same grade, scored off the data sheet. This is not an exact equivalent, and it is not an OEM approval. Confirm the substitute with the machine builder.
Documents
Related: Shell, Catenex T, viscosity index calculator, ISO / SAE / AGMA chart.
Questions
What is a Shell Catenex T 129 equivalent?
Published oils in the same application and grade include Mobil Medium. The match is from typical data-sheet values, not from an OEM approval. It is not an exact equivalent. Confirm the substitute with the machine builder.
Can Shell Catenex T 129 be mixed with another oil?
Mixing two oils that share a base family is sometimes done and sometimes a mistake. Do not mix this oil with a PAG. For any other mix, follow the maker's change-over guidance and the machine manual.
Report a data error
The report is stored for review. It does not change the page by itself, and it is not emailed anywhere yet.
